Fm Transmitter Using Labview Project Report On Testing Of Audio Set Using Labview And Fm Transmitter And Pxi Chasis?

Project report on testing of audio set using labview and fm transmitter and pxi chasis? - fm transmitter using labview

• The module is able to take audio input signals to generate the LabVIEW software and the CD.
• After sending analog audio signals via an analog output card (NI-6025 card).
• This signal is sent to the LPF card integrated circuit for filtering noise from filtered signal and the NI PXI-4472 chassis and an RF modulator indicated.
• The RF modulated signal to the converter circuit, AM & transmitter signals in the AM band is no longer transmitted.
• The AM frequencies is a circuit for AM receiver are received.
• Circuit converter converts the high-frequency AM band frequencies in the audio and converting analog data.
• The analog data is taken from the NI-4472 card (two channels for data acquisition DAQ RX and TX).
• The data are analyzed with the software LabVIEW converts audio signals.
• TX and RX data was done by NI LabVIEW.
• parameters such as THD, frequency response, the amount of phase shift, SINAD, THD + N in comparison.
Graphics: --